Welcome
Dec 13, 2022 / By System Admin / in TMT Steel
Cut and Bend TMT | Conventional TMT Steel |
2 % Savings(See cost comparison) | No Savings |
0 % WastageEliminates/ No scrap produced | 5 % Minimum WastageUnused material being discarded as scrap |
Faster ConstructionSaves more timeHassle free fast procurementRequires lesser labour work space | Slower ConstructionBar bending at site consumes more timeProcurement depends upon stock availabilityRequires bigger work space due to lengthy rods |
Higher Structural StrengthMatches IS RequirementsPrecisely cut by specialized machineryCouplers are used for TMT rod joining(Click here to know how cut and bend tmt is produced) | Lower Structural StrengthDo not match IS requirementInconsistency and uneven manual bendingTMT rods are joined unevenly using fragile wires |
No Site TheftPacked materials delivered to your site on time, as per your construction schedule thus avoiding stacking and lossage. | Prone to PilferageSince steel rods are dumped at the site and are left unattended, chances of materials being stolen is much higher. |
Requires less Storage SpaceNo overstacking at siteEasy to audit the quantityPacked accordingly to bar bending schedule | Requires more Storage SpaceIncreases on-site inventoryDifficult to seggregate & audit all size rodsUnevenly dumped rods consumes more storage space |
Dec 13, 2022 by System Admin
Apr 11, 2021 by System Admin