Cut and Bend TMT
|
Conventional TMT Steel
|
2 % Savings
(See cost comparison)
|
No Savings
|
0 % Wastage
Eliminates/ No scrap produced
|
5 % Minimum Wastage
Unused material being discarded as scrap
|
Faster Construction
Saves more time
Hassle free fast procurement
Requires lesser labour work space
|
Slower Construction
Bar bending at site consumes more time
Procurement depends upon stock availability
Requires bigger work space due to lengthy rods
|
Higher Structural Strength
Matches IS Requirements
Precisely cut by specialized machinery
Couplers are used for TMT rod joining
(Click here to know how cut and bend tmt is produced)
|
Lower Structural Strength
Do not match IS requirement
Inconsistency and uneven manual bending
TMT rods are joined unevenly using fragile wires
|
No Site Theft
Packed materials delivered to your site on time, as per your construction schedule thus avoiding stacking and lossage.
|
Prone to Pilferage
Since steel rods are dumped at the site and are left unattended, chances of materials being stolen is much higher.
|
Requires less Storage Space
No overstacking at site
Easy to audit the quantity
Packed accordingly to bar bending schedule
|
Requires more Storage Space
Increases on-site inventory
Difficult to seggregate & audit all size rods
Unevenly dumped rods consumes more storage space
|